F09K / POTENTIOMETER
F09K Series Insulated Shaft Potentiometer
9 mm square insulated shaft rotary potentiometer: single or dual gang, top or side adjust, multiple shaft types and lengths, optional detents and anti-sulfur long-life build.
POLYSHINEHK / CATALOG
All products
See every product category and the series currently published. Contact us for categories without listed models.
01 / POTENTIOMETER
Potentiometer
Precise signal and power adjustment
View specifications
Fxx43 / POTENTIOMETER
Fxx43 Series Slide Potentiometer
Metal-housed single-gang slide potentiometer with 20, 25, 30, 45 or 60 mm travel; optional center detent, frame, dust protection, plastic or metal lever, and standard or long-life construction.
F24K5 / POTENTIOMETER
F24K5 Series Metal Shaft Potentiometer
Single-gang, side-adjust metal-shaft rotary potentiometer with solder lugs for industrial panel controls; sealed or dustproof construction, several shaft profiles and lengths, and at least one million standard rotational cycles.
F091 / POTENTIOMETER
F091 Series Metal Shaft Potentiometer
9.5 mm square metal-shaft rotary potentiometer with 1 to 6 gangs, top or side adjust PC pins, optional rotary, momentary or push-lock switches, plus anti-sulfur and long-life versions.
F11E / ENCODER
F11E Series Rotary Encoder
Rotary encoder with optional momentary switch, 5 mm or 7 mm bushing, side- or top-adjust PC pins, 15 or 20 pulses with or without detents, plain or M7 threaded bushing, and multiple shaft types and lengths.
F08E / ENCODER
F08E Series Rotary Encoder
Miniature, highly accurate contact-type incremental encoder, about 8 mm wide and 2.35 mm high, with 12 detents for consumer products. Recommended model: F08E-V2S1.
F05E / ENCODER
F05E Series Rotary Encoder
Miniature, highly accurate contact-type incremental encoder, about 5 mm wide and 2.7 mm high, with 12 detents, in V1, H1 and H2 types for consumer products. Recommended model: F05E-V1.
FSE10 / SENSOR
FSE10 Series Slide Position Sensor
Compact long-life slide position sensor in 8 mm side-adjust and 9 mm top-adjust formats, with a linear B taper for precise linear-position sensing.
FSE11 / SENSOR
FSE11 Series Rotary Position Sensor
Ultra-thin 2.2 mm SMD endless rotary position sensor with dustproof construction, D-type rotor, four effective electrical-angle options and a one-million-cycle life.
FSE28 / SENSOR
FSE28 Series Rotary Position Sensor
Hollow-shaft rotary position sensor with dustproof construction and heat-resistant FR-4 element. Endless 360° rotation, standard or custom terminals, and multiple electrical-angle codes.
FPM-PS3 / FLEXIBLE PCB / MEMBRANE
FPM PS3 Series Controller Membrane Circuit
Flexible membrane circuit for PS3 controller buttons: silver circuits and carbon contacts printed on PET, switched by silicone keys. Each version fits a different controller generation; our team will confirm the right version for your controller.
FPM-PS4 / FLEXIBLE PCB / MEMBRANE
FPM PS4 Series Controller Membrane Circuit
Flexible membrane circuit for PS4 controller buttons: silver circuits and carbon contacts printed on PET, switched by silicone keys. Each version fits a different controller generation; our team will confirm the right version for your controller.
FPM-PS5 / FLEXIBLE PCB / MEMBRANE
FPM PS5 Series Controller Membrane Circuit
Flexible membrane circuit for PS5 controller buttons: silver circuits and carbon contacts printed on PET, switched by silicone keys. Each version fits a different controller generation; our team will confirm the right version for your controller.
FSR / FLEXIBLE PCB / MEMBRANE
FSR Membrane Force Sensor Custom Example
A custom example: an FSR (force-sensing resistor) membrane sensor one customer ordered from us. The harder it is pressed, the lower its resistance, so it can sense how strongly it is pressed. It combines a flexible sensing film, a signal-conversion circuit and companion software, and can bend to fit the product. If you have your own membrane idea, talk to our team.
FST10-S9F1 / SWITCH
FST10-S9F1 8-Direction Lever Switch with Push Switch
Compact switch for electronic equipment: the lever tilts in 8 directions and returns to center (SW01), and pressing down operates a push switch (SW02). Rated DC 5V 10mA, operating temperature −40°C to +85°C.
FST070 / SWITCH
FST070 4-Direction Multiway Switch with Center Push
Compact, low-profile multiway tact switch with 4-direction input and center push. About 7.5 × 7.35 mm outline, reflow solderable, supplied in 16 mm embossed taping. Available as FST070-01 and FST070-02.
FJM10K / JOYSTICK
FJM10K Series Joystick Potentiometer
Joystick potentiometer for finger-tip operation: circular lever movement with a gap-free feel in every direction, an optional built-in tact switch (push down) and a long-life version. 5K–100KΩ, linear B taper.
FJR35 / JOYSTICK
FJR35 Series Carbon Joystick Potentiometer
Dual-axis (X/Y) carbon-film joystick potentiometer with a 10KΩ linear (B taper) track on each axis, 30° travel each side and a GH1.25 6-pin cable. N2B10KF0 returns to center on both axes; 0004A-L015A-TW has one non-return axis that stays where it is pushed, suited to throttle-type uses.
FJH10K-S / JOYSTICK
FJH10K-S Series Hall Effect Joystick
Non-contact joystick using Hall-effect sensors. The lever returns to center when released and has a push switch. Available as S3D (PS5), S4D (PS4) and S5D (Xbox) with largely the same electrical and mechanical ratings; the outline differs to fit each controller.
FJH10K / JOYSTICK
FJH10K Series TMR Joystick (New Structure)
Non-contact joystick using TMR (tunnel magnetoresistance) sensors. The lever returns to center when released and has a push switch. Available in new-structure versions for PS5 (0036A, 0046A), PS4 and Xbox controllers — 0046A has a different outline that fits the Sony PS5 DualSense Edge as well as other PS5 controllers, while 0036A fits PS5 controllers other than the DualSense Edge — with the same electrical and mechanical ratings; the outline differs to fit each controller.
FJH35 / JOYSTICK
FJH35 Series TMR Dual-Axis Joystick
Non-contact dual-axis joystick using TMR (tunnel magnetoresistance) sensors, with 30° travel each side and a linear output within the specified range. 0005A returns to center on both axes; on 0004A the X axis is non-return (it stays where pushed) and only Y self-centers, suited to hold-position control such as robot or machine speed control.