SENSOR / FSE11
FSE11 Series Rotary Position Sensor
Ultra-thin 2.2 mm SMD endless rotary position sensor with dustproof construction, D-type rotor, four effective electrical-angle options and a one-million-cycle life.
This page supports preliminary selection only. Rotor fit, electrical angle, PCB lands and production specifications must be confirmed with our team for the application.
General specifications
| Parameter | Value |
|---|---|
| Features | Internal dust protection, suitable for lead-free reflow soldering, wear-resistant materials, 2.2 mm ultra-thin body and RoHS compliance |
| Total resistance | 1KΩ ~ 100KΩ |
| Total resistance tolerance | ±20% |
| Resistance taper | B linear taper |
| Rated power | 0.1W |
| Linearity | Electrical angle >200°: ±2%; ≤200°: ±3% |
| Rotational noise | Less than 80mV |
| T.C.R. | ±500 ppm/°C |
| Effective electrical angle | 180° / 250° / 320° / 333°; 333° specification tolerance ±3° |
| Rotational torque | 0–30 gf·cm |
| Rotor push-pull strength | Over 1.0 kgf for 10 seconds |
| Total rotational angle | 360° endless |
| Life cycles | 1,000,000 cycles min. |
| Operating / storage temperature | −40°C to +120°C |
| Typical applications | Automotive robot-joint controls, HVAC sensors, motor-drive units, electric motor-driven bicycles and rotary-angle sensing |
Dimensions & construction
| Parameter | Value |
|---|---|
| Mounting format | 01: SMD type with D-type rotor |
| Rotor dimensions | D-type rotor with Ø4.0 mm bore (+0.1 / 0); confirm flat orientation against the production drawing |
| Body height | 2.2 mm ultra-thin construction |
| PCB & circuit | Three-terminal (1 / 2 / 3) SMD land pattern; request the production drawing for dimensions, tolerances and rotor zero position |
| Environmental tests | Dry heat 120±3°C / 250±8h; cold −40±3°C / 168±4h; humidity 60±2°C at 90–95%RH / 250±8h; 5 temperature cycles from −40°C to +120°C |
General values are typical references; confirm production specifications with PolyshineHK.
HOW TO ORDER / FSE11
Part number builder
Pick each option and the full P/N is generated below. Send us the P/N and we know exactly what you need.
What this P/N means
Every code is translated into its actual specification. If anything remains unclear, send the complete P/N to our live team.
- Product type · 01
- SMD type
- Rotor style · D
- D-type rotor
- Resistance taper · B
- Linear (0B)
- Total resistance · 1K
- 1K
- Electrical angle · p0
- 180°
Your P/NFSE11-01DB1Kp0