PS
Potentiometer · Series

POTENTIOMETER / FTB10

FTB10 Series 10mm Dust-proof Trimmer Potentiometer

10mm dust-proof carbon trimmer potentiometer with optional self-extinguishing UL94V-0 housing, RoHS compliant. Top adjust (H) or side adjust (V) PC pins, three terminal types, L / X / M rotors; the M rotor accepts a range of adjustment shafts, and an anti-sulfur version is available.

Selection follows the downloadable PDF; confirm production specifications with our team. The table lists a total resistance range of 1KΩ ~ 1MΩ, while the tolerance row also covers 100Ω ~ 5MΩ; the ordering table offers 1K ~ 1MEG, so please ask us about values outside that range.

General specifications
ParameterValue
Resistive elementCarbon
Total resistance range1KΩ ~ 1MΩ
Resistance tolerance1KΩ < TR < 1MΩ: ±20%; 100Ω ≤ TR ≤ 1KΩ: ±30%; 1MΩ ≤ TR ≤ 5MΩ: ±30%
Resistance taperA (audio 15A) / B (linear 0B) / C (reverse audio 15C)
Voltage ratingB taper: DC 200V; other tapers: DC 100V
Power ratingB taper: 0.15W at 50°C; A, C taper: 0.07W at 50°C
Contact noise10% max (TR < 1MΩ); 25% max (TR ≥ 1MΩ)
Residual resistanceR < 100KΩ: term. 1~2 and 2~3 10Ω max; R ≥ 100KΩ: less than 0.5% of total resistance
Electrical rotational angle220° ± 20°
Total rotational angle235° ± 10°
Stopper strength≥500 gf·cm
Rotational torque20 ~ 200 gf·cm
Temperature range−25°C ~ +70°C
Temperature coefficient±500ppm/°C (TR < 100K); ±1000ppm/°C (TR ≥ 100K) at −25°C ~ +70°C
Humidity95%RH at 40°C, 500H, ΔTR ±10%
Dry heat70 ± 3°C, 240H, ΔTR +5/−15%
Load lifeRated power at 50°C for 1,000 hours, ΔTR ±10%
Resistance to soldering heat260 ± 5°C, 10 sec, ΔTR ±5%
Rotational life10,000 cycles, ΔTR ±10%
Application items
ParameterValue
Key features10mm dust-proof enclosure; carbon resistive element; optional self-extinguishing UL94V-0 housing; RoHS compliant
Body sizeBody diameter Ø10.3 ± 0.2mm, thickness approx. 4.5mm
Adjust direction and terminalsH: top adjust PC pins, Type 1 / 2 / 3; V: side adjust PC pins, Type 1 / 2 (Type 3 not available)
Rotor typesL / X / M rotors; only the M rotor can take a shaft
Shaft types0: without shaft; 1 / 2 / 3: knurled adjustment shafts (Type 3: Ø5mm, 13 ± 0.2mm overall); 4 / 5: Ø5mm, 10mm slotted shafts with full CCW position at approx. 60° and 30°
Shaft insert directionN: without shaft; M: shaft inserted from the front; X: shaft inserted from the back
PCB layout3-Ø1.3mm terminal holes at 2.5mm pitch; top adjust pins 1 and 3 span 10mm; side adjust offset is 2.5mm for Type 1 and 5mm for Type 2. Refer to the PDF for each drawing and its tolerances.
Drawing examplesFTB10-01H1M0N / 01V1M3X / 01H2M3X / 01V2M0N / 01H1M3X

General values are typical references; confirm production specifications with our team.

HOW TO ORDER / FTB10

Part number builder

Pick each option and the full P/N is generated below. Send us the P/N and we know exactly what you need.

What this P/N means

Every code is translated into its actual specification. If anything remains unclear, send the complete P/N to our live team.

Product type · 01
Standard
Terminal configuration · H
Top adjust, PC pins
Terminal type · 1
Type 1
Rotor type · M
M type (accepts shaft)
Shaft type · 0
Without shaft
Shaft insert direction · N
Without shaft
Resistance taper · B
Linear (0B)
Total resistance · 1K
1K
Operation life · —
Std. life w/o anti-sulfur
Your P/NFTB10-01H1M0NB1K