POTENTIOMETER / F24K5
F24K5 Series Metal Shaft Potentiometer
Single-gang, side-adjust metal-shaft rotary potentiometer with solder lugs for industrial panel controls; sealed or dustproof construction, several shaft profiles and lengths, and at least one million standard rotational cycles.
This page is for preliminary selection only. Shaft profile, full-CCW orientation, life/anti-sulfur version and production specifications must be confirmed with our team for the actual application.
| Parameter | Value |
|---|---|
| Construction | Single gang, side adjust, solder lugs and metal shaft; RoHS compliant |
| Total resistance | 1KΩ ~ 1MΩ |
| Total resistance tolerance | 500Ω < R < 1MΩ: ±20%; R ≤ 500Ω or R ≥ 1MΩ: ±30% |
| Resistance taper | A, B, C |
| Max. operating voltage | DC 200V |
| Rated power | Linear taper B: 0.5W; other tapers: 0.25W |
| Rotational noise | Less than 300mV |
| Insulation resistance | More than 100MΩ at DC 1000V |
| Withstand voltage | AC 1000V for 1 minute |
| Residual resistance | Terminals 1–2 and 2–3: each max. 0.5% of total resistance |
| Contact noise | 10% or less of total resistance |
| Total rotational angle | 300° ± 10° |
| Rotational torque | 5 ~ 70 gf·cm |
| Stopper strength | 9.18 kgf·cm min. |
| Push-pull strength | 12.75 kgf min. |
| Bushing nut tightening strength | 15 kgf·cm min. |
| Rotational life | Standard: 1 million cycles min.; long life: 2 million cycles min. Anti-sulfur version is confirmed by our team |
| Operating temperature range | −10°C ~ +70°C |
| Parameter | Value |
|---|---|
| Mounting format | Side adjust, solder lugs, single gang, three terminals (1 / 2 / 3) |
| Body & bushing | Approx. Ø23 mm body; M9 × P0.75 threaded bushing |
| Panel layout | Approx. Ø9.3 mm shaft hole and Ø3.5 mm locating hole at 10 mm centres; confirm tolerances against the production drawing |
| F-type shaft lengths | Codes 1 / 2 / 3 / 4: L 20 / 20 / 30 / 35 mm; F 7 / 8.5 / 12 / 12 mm |
| S-type shaft lengths | Codes 1–7: L 19 / 20 / 25 / 30 / 35 / 40 / 50 mm |
| R-type shaft lengths | Codes 1–5: L 19 / 20 / 22.2 / 30 / 35 mm |
| Full CCW position | F type: A / B / C / D; S type: A / C; R type: N. Confirm the actual orientation for the knob and panel layout |
General values are typical references; confirm production specifications with PolyshineHK.
HOW TO ORDER / F24K5
Part number builder
Pick each option and the full P/N is generated below. Send us the P/N and we know exactly what you need.
What this P/N means
Every code is translated into its actual specification. If anything remains unclear, send the complete P/N to our live team.
- Seal type · S
- Sealed
- Metal shaft type · F
- F type | flatted shaft
- Shaft length code · 1
- Code 1 · L 20 mm · F 7 mm
- Full CCW position · A
- Position A
- Resistance taper · A
- Audio (15A)
- Total resistance · 1K
- 1K