POTENTIOMETER / F16K
F16K Series 16mm Metal Shaft Potentiometer
Metal-shaft carbon-film rotary potentiometer with single, dual, 4- and 6-gang configurations, optional rotary or momentary switches, multiple terminal and shaft types, and anti-sulfur and long-life versions.
Based on the supplied catalogue, for preliminary selection only. Full CCW codes for momentary-switch plastic shafts are not specified; confirm these combinations and production specifications with our team.
| Parameter | Value |
|---|---|
| Total resistance | 1KΩ ~ 1MΩ |
| Total resistance tolerance | 500Ω < R < 1MΩ: ±20%; R ≤ 500Ω or R ≥ 1MΩ: ±30% |
| Resistance taper | A, B, C; ordering table also lists D |
| Max. operating voltage | Linear taper B: AC 200V; other tapers: AC 150V |
| Rated power | Linear taper B: 0.2W; other tapers: 0.1W |
| Rotational noise | Less than 100mV |
| Insulation resistance | More than 100MΩ at DC 500V |
| Withstand voltage | 1 minute at AC 500V |
| Residual resistance | Terminals 1–2 and 2–3: each less than 20Ω |
| Gang error (dual unit) | −40dB ~ 0dB ± 3dB |
| Total rotational angle | 300° ± 5° |
| Rotational torque | 20 ~ 100 gf·cm |
| Stopper strength | ≥ 7.0 kgf·cm |
| Push-pull strength | ≥ 8.0 kgf |
| Click torque | 100 ~ 300 gf·cm |
| Bushing nut tightening strength | ≥ 8 kgf·cm |
| Rotational life | Standard: 15,000 cycles Min.; long life: 1,000,000 cycles Min. |
| Operating temperature range | −10°C ~ +70°C |
| Switch circuit | S.P.S.T. |
| Switch contact resistance | < 50mΩ |
| Switch rating | Single unit: 1.0A at AC/DC 12V |
| Switch rotational angle | 35° ± 10° |
| Switch torque | 70 ~ 250 gf·cm |
| Switch life | 15,000 cycles |
| Parameter | Value |
|---|---|
| Construction | Metal shaft, carbon-film element; catalogue marked RoHS compliant |
| Gang and switch configurations | N single / G dual / J 4 gangs / L 6 gangs / S single with rotary switch (bottom terminals) / M single with momentary switch / H single with rotary switch (side terminals) |
| Terminal configuration | V side adjust, PC pins / P top adjust, solder lugs / D rear adjust, PC pins / H top adjust, PC pins |
| Shaft type | B / A die-cast shafts (single or dual gang); F / R / S / Q machined shafts; C / D plastic shafts (momentary switch) |
| Shaft length | Coded by shaft type; L 10–35 mm, availability varies by shaft |
| Full CCW position | F: A/B/C/D; Q/S: A/C; B: C; A: C/D; R: N; angle 30° ± 10° |
| Bushing and PCB mounting | Q-shaft examples: M7 × P0.75 bushing, Ø7.8 mm panel hole, 5 mm pin pitch; confirm dimensions against drawings |
General values are typical references; confirm production specifications with our team.
HOW TO ORDER / F16K
Part number builder
Pick each option and the full P/N is generated below. Send us the P/N and we know exactly what you need.
What this P/N means
Every code is translated into its actual specification. If anything remains unclear, send the complete P/N to our live team.
- Gang and switch configurations · N
- Single gang
- Terminal configuration · V
- Side adjust, PC pins
- Detent option · 0
- No shaft detent
- Shaft type · B
- B type die-cast shaft
- Shaft length code · 1
- Code 1 · L 12 · I 4.5 · M 2 mm
- Full CCW position · C
- Position C
- Resistance taper · A
- Audio (15A)
- Total resistance · 1K
- 1K
- Life and anti-sulfur options · —
- Standard life without anti-sulfur