POTENTIOMETER / F09K
F09K Series Insulated Shaft Potentiometer
9 mm square insulated shaft rotary potentiometer: single or dual gang, top or side adjust, multiple shaft types and lengths, optional detents and anti-sulfur long-life build.
General specifications
| Parameter | Value |
|---|---|
| Total resistance | 1KΩ ~ 1MΩ |
| Total resistance tolerance | 500Ω < R < 1MΩ: ±20%; R ≤ 500Ω or R ≥ 1MΩ: ±30% |
| Resistance taper | A, B, C |
| Max. operating voltage | AC 50V / DC 20V |
| Rated power | Single unit: 0.05W; Dual unit: 0.03W |
| Rotational noise | Less than 100mV |
| Insulation resistance | More than 100MΩ at DC 250V |
| Withstand voltage | 1 minute at AC 250V |
| Residual resistance | Term. 1~2: less than 20Ω; Term. 2~3: less than 20Ω |
| Gang error (dual unit) | −40dB ~ 0dB ± 3dB |
| Gang number | Single gang (N) / Dual gang (G) |
| Detent option | No detent / center detent (single gang) / 21 detents (single gang) |
| Total rotational angle | 280° ± 10° |
| Rotational torque | 10 ~ 90 gf·cm |
| Stopper strength | 3.0 Kgf·cm Min. |
| Push-pull strength | 5.0 Kgf Min. |
| Click torque | 30 ~ 120 gf·cm |
| Rotational life | Standard: 15,000 cycles Min.; Long life: 100,000 cycles Min. |
| Operating temperature range | −10°C ~ +70°C |
Dimensions & construction
| Parameter | Value |
|---|---|
| Body size | 9 mm square |
| Terminal & bushing | H top adjust bushingless / V side adjust bushingless / A top adjust with sleeve bushing / B side adjust with sleeve bushing |
| Height (H) | 0 = N/A (top adjust only), 1 = 6.5 mm, 2 = 10.0 mm, 3 = 12.5 mm (side adjust only) |
| Shaft type | F / N / C / Y / T / D / P / Q / K types (splined, slotted, knurled and more) |
| Shaft length | Specified by code; bushing available only when shaft length exceeds 20 mm |
| Full CCW position | C / A / D group per shaft type, 40° ± 10° |
General values are typical references; confirm production specifications with PolyshineHK.
HOW TO ORDER / F09K
Part number builder
Pick each option and the full P/N is generated below. Send us the P/N and we know exactly what you need.
What this P/N means
Every code is translated into its actual specification. If anything remains unclear, send the complete P/N to our live team.
- Gang number · N
- Single gang
- Terminal & bushing · H
- Top adjust, bushingless
- Height · 0
- Not available (top adjust only)
- Detent option · 0
- No detent
- Shaft type · F
- F-type | Ø6 mm round shaft, end-slot profile
- Shaft length code · 1
- Code 1 · L 15 mm · F 6 mm
- Full CCW position group · C
- Group C (F / N / C shafts)
- Resistance taper · A
- Taper A
- Total resistance · 1K
- 1K
Your P/NF09K-NH00F1CA1K