JOYSTICK / FJH35
FJH35 Series TMR Dual-Axis Joystick
Non-contact dual-axis joystick using TMR (tunnel magnetoresistance) sensors, with 30° travel each side and a linear output within the specified range. 0005A returns to center on both axes; on 0004A the X axis is non-return (it stays where pushed) and only Y self-centers, suited to hold-position control such as robot or machine speed control.
Preliminary information only. Our team will confirm the knob (M2×0.25 internal thread, ≥3.3 mm deep), cable, connector and production specifications for your application.
| Parameter | Value |
|---|---|
| Sensing | TMR sensor (non-contact) |
| Center voltage ratio | 40–60% (0004A: Y axis only) |
| Center return difference | Less than 5.5% |
| Sensor IC supply | VDD up to 5.5V; IDD up to 3.5mA |
| Linearity | ±3% |
| Insulation / withstand voltage | 100MΩ min at DC 250V; AC 250V for 1 min without damage or arcing |
| Life | 200,000 cycles min. |
| Operating / storage temperature | 0004A: −10 to +70°C; 0005A: −30 to +80°C / storage −30 to +80°C |
| Parameter | Value |
|---|---|
| Operating angle | 30° ±3° each side |
| Lever operating force | 50±40 gf |
| Reset accuracy | Within ±5° |
| Stopper strength | Side force 3 kgf for 3 s min. |
| Push strength | 3.0 kgf for 3 s min. |
General values are typical references; confirm production specifications with PolyshineHK.
HOW TO ORDER / FJH35
Part number builder
Pick each option and the full P/N is generated below. Send us the P/N and we know exactly what you need.
What this P/N means
Every code is translated into its actual specification. If anything remains unclear, send the complete P/N to our live team.
- Model / return type · 0005A
- Both axes self-centering