JOYSTICK / FJH10K-S
FJH10K-S Series Hall Effect Joystick
Non-contact joystick using Hall-effect sensors. The lever returns to center when released and has a push switch. Available as S3D (PS5), S4D (PS4) and S5D (Xbox) with largely the same electrical and mechanical ratings; the outline differs to fit each controller.
Preliminary information only. Our team will confirm the outline drawing, PCB holes, soldering conditions and production specifications for your controller design.
| Parameter | Value |
|---|---|
| Sensing | Hall-effect sensor (non-contact) |
| Supply voltage | 1.7–5.5V (S5D tested at 1.7–3.6V DC) |
| Supply current | Typ. 2.5mA at 3.3V / 4mA at 5V |
| Output voltage ratio | Center 40–60%; at 26°: ≤18% one side, ≥82% the other |
| Insulation / withstand voltage | 100MΩ min at DC 250V; AC 250V for 1 min without breakdown |
| Push switch | 12V DC 50mA; contact resistance <100mΩ; travel 0.55 +0.5/−0.4 mm |
| Life | Lever 5,000,000 cycles; switch 1,000,000 cycles |
| Operating / storage temperature | −10°C ~ +70°C / −30°C ~ +80°C |
| Parameter | Value |
|---|---|
| Max / effective angle | 28° / 26° |
| Lever operating force | 120±50 gf |
| Reset accuracy | ±3° |
| Stopper strength | Side force 3 kgf for 3 s |
| Pull / push strength | Pull 5 kgf, push 9.8 kgf, 3 s each |
| Soldering | Solder at 260±5°C for 5 s |
General values are typical references; confirm production specifications with PolyshineHK.
HOW TO ORDER / FJH10K-S
Part number builder
Pick each option and the full P/N is generated below. Send us the P/N and we know exactly what you need.
What this P/N means
Every code is translated into its actual specification. If anything remains unclear, send the complete P/N to our live team.
- Model / controller · S3D
- PS5